The licensing system used by Horizon (Crypkey) was updated in versions of software 3.6.742.0 and 3.7.742.0 and newer.
Since only one Crypkey service can be installed at a time this means that you cannot use an older version before 3.6/7.742.0 while
Read more…If you start a simulation and find that the communication link status is immediately red the most likely cause is that the Link Range Checking feature is turned on and the distance between the UAV and GCS is too far.
This feature will simulate the ra
Read more…Starting in Horizon 3.7.965.0 there is a new way for setting/using a geofence to/from an .ini file instead of using the VRS editor and the geofence VRS fields. This new method allows the user to use a graphical interface to set, check and modify the
Read more…Hi everyone, we have problem with horizon license.
In the beginning, we have installed the horizon 3.4 and used the license. there is no problem here.
Then, we plan to use the horizon beta 3.7. Firstly, we picked the license from the installed horizo
Read more…If you are having any issues connecting to your autopilot in Horizon, please read the below instructions on connecting with a direct (wired) serial connection.
We have found that USB to Serial adapter cables with an FTDI chipset in them are the most
Read more…Hi everyone
I'm facing a problem regarding the upload of my flying area map to my Horizon GCS. Actually I'm not able to import my JPG or PNG map which I got from Google Earth to Horizon. I use Horizon 3.4, but it shows an error while selecting the m
Read more…hi to all,
our company hv bought cropcam with MP2028g autopilot.
but we cannot establish connection btwn radio modem n base station modem to horizon.
pop up error like : port in use or not detected, uav-1 in use by another prog.
finally, lice
Read more…
